During the process of repairing car paint, there is sometimes a phenomenon where the paint film is dull and shiny, but after monotony, the gloss may gradually fade. What is the common cause of this phenomenon? A brief analysis of the reasons for the Guangzhou automotive paint coating manufacturer and everyone is as follows:
1. The adhesion of the primer is poor, and perhaps the topcoat is sprayed on it before the primer has fully cured;
2. The paint mixing ratio is not correct, for example, the curing agent is not good, perhaps there are too many diluents;
3. The diluent used in the paint may have poor quality curing agents, or may have used incompatible products;
4. Improper spraying method;
5. If the temperature is too high or too low, it may lead to slow monotonic speed, solvent evaporation, and car exhaust invading the surface of the paint film;
6. The surface of the paint film is not treated clean;
7. Strong cleaning agent applied to newly sprayed paint film, or premature polishing
Based on the above reasons, suggestions are as follows:
1. Apply qualified primer and wait for the primer to become fully monotonous before applying the topcoat;
2. It is recommended to use matching products from the same manufacturer for better coating and spraying effect;
3. Allocate and mix thoroughly according to the technical instructions provided by the manufacturer in proportion;
4. Use the correct spraying method;
5. Before spraying, it is necessary to completely treat the base and paint film surface to ensure cleanliness, and dry the cleaning agent with a dry cloth;
6. Ensure that the environmental conditions meet the requirements of painting and spraying;
7. Do not use strong cleaning agents on the surface of newly sprayed paint films, and do not polish until the paint film has fully cured
Article origin: Advertising logo paint http://www.jinliangxincai.com
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface