The phenomenon of car paint falling mainly refers to the loss of adhesion to the substrate due to paint cracking after the car is sprayed, and the phenomenon of small or large area detachment of the coating film under external force is called falling, which can also be divided into three types: small piece falling, large piece falling, and large piece falling. So, what is the reason for the phenomenon of car paint falling off? What is the solution? Next, let's learn more about it with the editor!
Reason:
1. Excessive lubrication on the surface of the coating can cause the paint film to fall off.
2. The surface treatment of the substrate before painting construction is not good, with oil stains, wax, moisture, dust, chemicals, etc., or the surface treatment is not carried out in a timely manner.
3. Spraying topcoat or varnish without drying the bottom layer can easily cause falling off.
4. Improper selection of the primer, high hardness of the primer, and slippery appearance can lead to the loss of adhesion between the primer and the topcoat, leading to the phenomenon of falling off.
Solution:
1. Before construction, the surface of the substrate should be treated with appropriate methods and any dirt left during the cleaning process should be removed.
2. Primer should be selected with good adhesion and wetting properties.
3. If the surface of the substrate is too lubricated, appropriate treatment methods should be taken before construction.
4. Wait until the base coat dries before spraying the topcoat and topcoat varnish.
5. Strictly follow the construction data provided by the paint manufacturer for construction.
Article source: Qingyuan Automotive Repair Paint http://www.jinliangxincai.com
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface