Why Does Car Paint Bubble
There must be no bubbles in the paint of a new car. Usually, the phenomenon of bubbles in the paint of a car is only present after the car undergoes innovation in repainting from scratch. There are many reasons for side blistering, and the most likely cause is the influence of moisture. What are the specific reasons for this? Next, let's follow the editor to learn more!
The first type is that after the car is painted, water is inside the paint film. When it is hot, it needs to evaporate, which will form pressure on the exterior of the car paint, causing bubbles to bubble. When it is cold, that is to say, the temperature is not that high, and the bubbles disappear. In fact, it is the same principle as heat expansion and cold contraction. Therefore, when we paint the car, we must be dry about the paint film and do not allow any water to be left on the side. This situation is basically due to improper paint operation, such as incomplete drying after water grinding, the use of gasoline instead of oil remover on the substrate, and incorrect paint ratio!
The second type is that the quality of car paint materials is not up to standard. Due to rainy and humid weather, moisture can easily invade the inside of the paint, and when the temperature rises, the paint film on the surface will seal the moisture inside. If the moisture cannot come out after evaporation, it will cause blistering on the surface of the paint. So the quality of car paint must be up to standard. If car paint needs to be painted, it is necessary to choose a large, legitimate car paint factory or 4S store. We always advise all car owners that cheap goods are not good, good goods are not cheap. If you want good quality, don't worry about prices! In this situation, we can only find a car paint factory to polish and innovate from scratch!
Article source: Automotive repair paint kunchong.net.cn
-
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
-
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
-
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
-
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface